ICT TESTER INLINE
ICT Tester INLINE is Kyorritsu’s ICT tester to check for manufacturing defects and substandard components on PCBA by measuring the electronic parameters of each component and checking for shorted or open circuits.
ICT can help ensure the quality and performance of the PCBA before moving on to the next steps in the manufacturing process.
ICT Tester Inline can be integrated into the PCBA production line, helping to automate the testing process and save time, cost and labor. Inline ICT tester can test PCBA immediately after SMT or DIP soldering, no need to uninstall or transfer PCBA.
Kyoritsu’s ICT Inline tester is one of the leading ICT Inline testers on the market. The machine has many features as follows:
- Speed: A PCBA can be tested in seconds (depending on the design of each PCB), improving efficiency and reducing wait times.
- Accuracy: Can measure electronic parameters with high accuracy, helping to detect the smallest errors.
- Coverage: Can test most types of components on PCBA, including those that are small in size or hard to reach.
- Easy maintenance and installation Fixture: The machine is designed to easily maintain and install Fixture when needed. Fixture is a part used to connect tester to PCBA. Fixture can be customized according to customer requirements.
- Easy programming and troubleshooting: Built-in user-friendly troubleshooting and programming software, helps users to use the tester easily and quickly.
– 256 pins (Standard) ~ 2.048 pins (Max)
– Expandable by 128 pins switching card
– Option: Above 2.049 pins ~16.000 pins
– Unlimited (The number of test step is limited by recorder)
– MAX 5 points
– MAX current limited: 20mA
– Short / Open Test: 1ms ~/pin
– Component Test: 0.75ms~/step
TEST COVERAGE / METHOD
|Short / Open :||Optimum detection on all pins|
|Resistor :||0.1 Ω ~ 40.00MΩ <Option> Low value resistor test
0.01Ω ~ 4.000Ω (Resolution 0.01Ω)
|Capacitor :||10pF ~ 40mF|
|Inductor :||10µH ~ 40H|
|Transistor/Diode :||VF/0.1V ~ 9.9V|
|Photocoupler :||ON/OFF functional test|
|Digital Transistor :||Vce/0.01V ~ 9.99V|
|Current Limit :||10mA (Max: 20mA)|
|Jumper :||Threshold 5Ω, 20Ω, 80Ω|
|Current Measurement :||0.1µA ~ 10mA (Bias 0.01V ~ 9.99V)|
|Capacitor Polarity :||PASS/FAIL|
|Function Test :||0.1V ~ 9.9V|