• Ceritified

    ISO 9001:2008

  • The Best

    #1 IN JAPAN

  • Number #1



  • Ultra high pressure type
    AT3 panel
    Backwash type
    RoHS compliant as standard
    Supports installation in a clean room

Suitable for laser marking process and laser peeling process where a large amount of dust is generated. Uses a high static pressure blower to maintain suction power even when maneuvering with small diameter pipes.

Click here for details on the AT3 panel


Structure and characteristics of particle collection

(1) Primary filter

■ Adopts Teflon micropore membrane filter
Highly peelable, maximizing the cleaning effect by wiping off.

■ Zeolite is pre-coated by a unique winding mechanism.
By precoating zeolite on a filter with a collection efficiency of 0.5 μ99.99% or more, it adsorbs and collects fumes and fine particles generated by laser marking.

With the suction blower, the fumes and fine dust in the sucked air fly up from the zeolite blow-up port, and at the same time, the zeolite is wound up and laminated on the filter.

Dust removal function [Gyro air type]

Equipped with a unique mechanism, it automatically removes dust for about 20 seconds. At the time of automatic dust removal, operation at capacity level 1 is performed for about 30 seconds to prevent backflow.
One of the conditions for automatic dust removal (1) When the operation is turned off after the accumulated operation time has elapsed for 1 hour or more
(2) When the capacity level is changed to 1 by remote operation

(2) Detachable flange

The size of the exhaust flange can be replaced with a single touch. * Install the exhaust flange with a diameter larger than that of the suction flange.

(3) Exhaust filter

Equipped with a HEPA filter, it can be used as it is in a clean room. (Clean class 100,000 ~ 10,000 * Inspection value at the time of shipment from our factory)

(4) Activated carbon cassette

A cassette type activated carbon filter that adsorbs odors. It can be easily replaced.

(5) Secondary filter

Protects electrical components from dust.


Control (accessories sold separately)

Remote control

By using a remote cable (sold separately / model: MT-173-8 (3m)), remote control linked with peripheral devices is possible.

  • Driving ON / OFF
  • Ability level (air volume) change

You can now change the ability level by remote control. Since the level is memorized every time the ability level is changed, the previous usage level is always called. In addition, it is possible to output operation signals, filter clogging signals, pressure signals, and abnormal signals.

Ethernet / RS-485

All functions that can be controlled by the AT3 panel can be controlled by a PC by using Ethernet or RS-485 communication.


Required air volume calculation formula

Q: Required air volume (m3 / min)
Vc: Control air speed (m / sec) ・ ・ ・ ・ See the figure below
X: Distance (m) ・・ ・ ・ ・ ・ ・ ・Distance from dust source to suction port
A: Opening surface Area (m2) ・ ・ ・ L × W
Air volume Q = 60 x Vc x (10 x X² + A)






* 1 This is a value measured with A scale (dBA) at any point 1 m away from the main body by connecting a hose to the suction port.
* 2 An optional remote cable is required to use the remote control function.
* 3 Optional support is available.
* 4 Value at the time of inspection shipped from our factory.
The contents are subject to change without notice.


Filter specifications



Please contact us if you need assistance.

Thank you