CBA-1200AT3-HI-V1 A high-pressure type that sucks up fine dust that has adhered with a vacuum cleaner-like force. It can be used in a clean room. Suitable for removing adhering dust using small diameter pipes and slit-shaped nozzles used in secondary battery manufacturing processes. Click here for details on the AT3 panel AT3パネルについて詳しくはこちら

 

Dust collection example seen in the video

 

Structure and characteristics of particle collection

24-hour continuous operation possible, compact and high performance

It is suitable for small-diameter piping used in the secondary battery manufacturing process and for suction of adhering dust using a slit-shaped nozzle. The compact design contributes to the miniaturization of equipment, which has been highly requested in recent years. It is the product that best embodies our concept of “small size and high performance”.

(1) Primary filter

A filter bag with a 5-layer structure of polypropylene non-woven fabric. By changing the air permeability of each layer, clogging is less likely to occur, and 95% or more can be collected at 45μ or more. Also, due to the 5-layer structure, the overall strength is high and it does not tear easily like a paper carton.

(2) Secondary filter

Polypropylene non-woven fabric is molded into a pleated filter. The outer frame is molded with ABS resin. The collection efficiency is high and 0.3μ can be collected by 99% or more.

(3) Exhaust filter

A HEPA filter is used as standard, and 99.97% or more of 0.3μ or more is collected.

 

Control (accessories sold separately)

Remote control By using a remote cable (sold separately / model: MT-173-8 (3m)), remote control linked with peripheral devices is possible. Driving ON / OFF Ability level (air volume) change You can now change the ability level by remote control. Since the level is memorized every time the ability level is changed, the previous usage level is always called. In addition, it is possible to output operation signals, filter clogging signals, pressure signals, and abnormal signals.

Ethernet / RS-485 All functions that can be controlled by the AT3 panel can be controlled by a PC by using Ethernet or RS-485 communication.

Easy attachment / detachment flange (standard: φ75) (sold separately) Can be replaced with one touch The suction port size can be changed The size of the suction port flange can be replaced with a single touch. The suction port flange (sold separately) can now be changed even after purchase. Changeable size Φ65: Model FRJ-D-65-35-108 Φ50 : Model FRJ-D-50-35-108 Φ38 : Model FRJ-D-38-35-108

 

Required air volume calculation formula

Q: Required air volume (m3 / min)
Vc: Control air speed (m / sec) ・ ・ ・ ・ See the figure below
X: Distance (m) ・・ ・ ・ ・ ・ ・ ・Distance from dust source to suction port
A: Opening surface Area (m2) ・ ・ ・ L × W
Air volume Q = 60 x Vc x (10 x X² + A)

 

Dimensions

 

Specifications

• * 1 This is a value measured with A scale (dBA) at any point 1 m away from the main body by connecting a hose to the suction port.
• * 2 An optional remote cable is required to use the remote control function.
• * 3 Optional support is available.
• * 4 Value at the time of inspection shipped from our factory.

The contents are subject to change without notice.

 

Filter specifications

 

Please contact us if you need assistance.

Thank you